West Coast Fieros Homepage
Forum Home Forum Home » General Fiero Chat » Members Rides
  New Posts New Posts RSS Feed - Harrison�s 88GT 3800SC1
  FAQ FAQ  Forum Search   Register Register  Login Login

Harrison�s 88GT 3800SC1

 Post Reply Post Reply Page  12>
Author
Message
D_sensitized View Drop Down
Admin Group
Admin Group
Avatar
Executive Member

Joined: 25 March 2008
Location: Canada
Status: Offline
Points: 601
Post Options Post Options   Quote D_sensitized Quote  Post ReplyReply Direct Link To This Post Topic: Harrison�s 88GT 3800SC1
    Posted: 24 March 2011 at 6:23pm

Now that there are some nicer days I figured I would get out and wash and take some new pictures of my fiero.
When I got it:


Exterior













Interior







Tried to get a picture to better show the nice trim overlays.



Engine





List of mods to date:
3800 series 1 supercharged V6 from a 1995 oldsmobile
and everything that goes with that- exhaust, intake, ECM reprogram, axles, walbro fuel pump, etc
4T60-e
Reversed the lettering on engine cover and added Pontiac emblem
Trans cooler behind passenger lower quarter panel
Trunk light switch
Aftermarket sound system
JVC head unit, kenwood and sony speakers and tweeters.
Limited Tuning hyper silver rims with nankang NS1 tires
Stock rims have michelin alpins
I don't have the recall weatherstripping so I put in a gutter of sorts in front of the decklid

Have lowering ball joints from Rodney Dickman, just havn't had time to install them yet.

Enjoy



Edited by D_sensitized - 24 August 2017 at 11:42pm
-Harrison
88GT 3800 SC1 F23 5-speed
Chilliwack
Back to Top
Bassman View Drop Down
Senior Post God
Senior Post God
Avatar
Sir Brian

Joined: 12 February 2007
Location: Canada
Status: Offline
Points: 2501
Post Options Post Options   Quote Bassman Quote  Post ReplyReply Direct Link To This Post Posted: 24 March 2011 at 6:44pm

Very clean and good looking car...can't wait to see how we do on the autox:)...what are you using for tires on autox?

Brian (Bassman)

86 GT Fastback 3.2L

2013 Mazda3 Sport GS SkyActive

[IMG]http://i170.photobucket.com/albums/u243/Bassman68/BassmanSignature.png">
Back to Top
Boxin' Robin View Drop Down
Senior Member
Senior Member
Avatar

Joined: 06 August 2010
Location: Canada
Status: Offline
Points: 148
Post Options Post Options   Quote Boxin' Robin Quote  Post ReplyReply Direct Link To This Post Posted: 24 March 2011 at 6:50pm
Awesome Fiero, Harrison! Love the shiny paint and the leather seats
Back to Top
Dawg View Drop Down
Senior Member
Senior Member
Avatar

Joined: 15 August 2009
Location: Canada
Status: Offline
Points: 988
Post Options Post Options   Quote Dawg Quote  Post ReplyReply Direct Link To This Post Posted: 24 March 2011 at 8:53pm
Those leather seats make great panty solvent.....:)  Ignore me, I'm married....

The Dawg
You dream it up....I'll make it
Back to Top
D_sensitized View Drop Down
Admin Group
Admin Group
Avatar
Executive Member

Joined: 25 March 2008
Location: Canada
Status: Offline
Points: 601
Post Options Post Options   Quote D_sensitized Quote  Post ReplyReply Direct Link To This Post Posted: 26 March 2011 at 7:40pm
Thanks for the compliments guys

For now I'm using the Nankangs for autocross, the price was right and they're much better then using snow tires
Once I am done with school and have some extra cash I will think about picking up some dedicated race wheels.
-Harrison
88GT 3800 SC1 F23 5-speed
Chilliwack
Back to Top
Bassman View Drop Down
Senior Post God
Senior Post God
Avatar
Sir Brian

Joined: 12 February 2007
Location: Canada
Status: Offline
Points: 2501
Post Options Post Options   Quote Bassman Quote  Post ReplyReply Direct Link To This Post Posted: 26 March 2011 at 9:07pm

Originally posted by D_sensitized D_sensitized wrote:

Thanks for the compliments guys

For now I'm using the Nankangs for autocross, the price was right and they're much better then using snow tires
Once I am done with school and have some extra cash I will think about picking up some dedicated race wheels.

Let me know when you do, I can put the word out and see if there are any deals like the recent one that Gary picked up.

Brian (Bassman)

86 GT Fastback 3.2L

2013 Mazda3 Sport GS SkyActive

[IMG]http://i170.photobucket.com/albums/u243/Bassman68/BassmanSignature.png">
Back to Top
Nexus View Drop Down
Senior Member
Senior Member
Avatar

Joined: 06 January 2011
Location: Canada
Status: Offline
Points: 111
Post Options Post Options   Quote Nexus Quote  Post ReplyReply Direct Link To This Post Posted: 27 March 2011 at 7:58am

Looks good, nice work on everything

I like the Pontiac aplique in the engine bay!!!

Charlie
84 SE
Back to Top
D_sensitized View Drop Down
Admin Group
Admin Group
Avatar
Executive Member

Joined: 25 March 2008
Location: Canada
Status: Offline
Points: 601
Post Options Post Options   Quote D_sensitized Quote  Post ReplyReply Direct Link To This Post Posted: 02 July 2012 at 8:16pm
It has been a while since I was in this thread.



I will add some more pictures of the F23 swap.







































And my most recent updates:





Finally got around to installing the tint that I bought a couple years ago...



The shifter I got from Dave I decided was a little too short for me, so I made another one.



too short on the left, my new one in the middle, and stock on the right.




Edited by D_sensitized - 25 August 2017 at 2:43pm
-Harrison
88GT 3800 SC1 F23 5-speed
Chilliwack
Back to Top
Dawg View Drop Down
Senior Member
Senior Member
Avatar

Joined: 15 August 2009
Location: Canada
Status: Offline
Points: 988
Post Options Post Options   Quote Dawg Quote  Post ReplyReply Direct Link To This Post Posted: 03 July 2012 at 2:49pm
I always intended to design an adjustable one, but never got around to it.  Maybe once my new motor is in....eh?

Dawg
You dream it up....I'll make it
Back to Top
D_sensitized View Drop Down
Admin Group
Admin Group
Avatar
Executive Member

Joined: 25 March 2008
Location: Canada
Status: Offline
Points: 601
Post Options Post Options   Quote D_sensitized Quote  Post ReplyReply Direct Link To This Post Posted: 11 June 2013 at 8:32pm
It's been a while, I think it's about time I update this thread.



Let's start with my battery relocation.



I'm cheap, so rather then buy a prebuilt battery box, I made one. And decided to finally do some fiberglass work.



First, make a mold:



oil bottle boxes are the perfect size for making a battery tray.



[URL=http://s96.photobucket.com/user/D_sensitized/media/fiero/photo53.jpg.html][IMG]http://i96.photobucket.com/albums/l169/D_sensitized/fiero/photo53.jpg][/URL]



I didn't get any pictures of just the box finished, so here it is installed.



[URL=http://s96.photobucket.com/user/D_sensitized/media/fiero/photo51.jpg.html][IMG]http://i96.photobucket.com/albums/l169/D_sensitized/fiero/photo51.jpg][/URL]



And the hold down that I didn't make until last weekend.



[URL=http://s96.photobucket.com/user/D_sensitized/media/fiero/fieroledandbattery015.jpg.html][IMG]http://i96.photobucket.com/albums/l169/D_sensitized/fiero/fieroledandbattery015.jpg][/URL]



like it was never even there

[URL=http://s96.photobucket.com/user/D_sensitized/media/fiero/fieroledandbattery011.jpg.html][IMG]http://i96.photobucket.com/albums/l169/D_sensitized/fiero/fieroledandbattery011.jpg][/URL]



I kept the cables inside the car rather than running them under the car.



[URL=http://s96.photobucket.com/user/D_sensitized/media/fiero/fieroledandbattery016.jpg.html][IMG]http://i96.photobucket.com/albums/l169/D_sensitized/fiero/fieroledandbattery016.jpg][/URL]



[URL=http://s96.photobucket.com/user/D_sensitized/media/fiero/fieroledandbattery017.jpg.html][IMG]http://i96.photobucket.com/albums/l169/D_sensitized/fiero/fieroledandbattery017.jpg][/URL]



[URL=http://s96.photobucket.com/user/D_sensitized/media/fiero/IMG-20121019-00315.jpg.html][IMG]http://i96.photobucket.com/albums/l169/D_sensitized/fiero/IMG-20121019-00315.jpg][/URL]





I tucked them under the carpet along the passenger side center console and through a hole I made in the firewall next to the shifter cables.



I will probably cut them down to get rid of the loops of wire at some point, but I just used the cables as is.

They were out of an oldsmobile aurora, which has the battery under the rear seats.



Edited by D_sensitized - 25 August 2017 at 2:45pm
-Harrison
88GT 3800 SC1 F23 5-speed
Chilliwack
Back to Top
Bassman View Drop Down
Senior Post God
Senior Post God
Avatar
Sir Brian

Joined: 12 February 2007
Location: Canada
Status: Offline
Points: 2501
Post Options Post Options   Quote Bassman Quote  Post ReplyReply Direct Link To This Post Posted: 11 June 2013 at 8:55pm
Well done
Brian (Bassman)

86 GT Fastback 3.2L

2013 Mazda3 Sport GS SkyActive

[IMG]http://i170.photobucket.com/albums/u243/Bassman68/BassmanSignature.png">
Back to Top
Patrick View Drop Down
Newbie
Newbie


Joined: 19 April 2008
Location: Vancouver
Status: Offline
Points: 5
Post Options Post Options   Quote Patrick Quote  Post ReplyReply Direct Link To This Post Posted: 11 June 2013 at 10:41pm

Nice job!

Now come on out on Saturday and see if this helps with the handling.

 

Back to Top
D_sensitized View Drop Down
Admin Group
Admin Group
Avatar
Executive Member

Joined: 25 March 2008
Location: Canada
Status: Offline
Points: 601
Post Options Post Options   Quote D_sensitized Quote  Post ReplyReply Direct Link To This Post Posted: 21 February 2017 at 9:00pm
After many years it is about time I updated this thread. I haven't actually changed much to my fiero since the last update, but have been driving it lots. After 5 years and over 70,000km, it will no longer be my daily driver. We needed something that I could drive the kids around in and insuring 3 cars is not worth it. So it gets to go back to being the toy.

I finally got my windshield replaced so I'll be ablle to take it autocrossing again this summer.

On the last day before insurance expired I took it out for a nice cruise out to Chilliwack lake after work.



Then no time was wasted before tearing into it. Here is how I left it for the night:



The plan is to basically restore it to its former glory and beyond. Daily driver duty has taken it's toll. The front end is full of rock chips, engine is filthy and the lower half is covered in grime, everything has gotten worn out. But it stil drives great, I've managed to keep the interior in great shape and the 3800/F23 is still awesome.

Even though it won't be on the road much, I intend on doing this work in stages so that I can still take it out for drives and meets and AutoX this summer in between being torn apart.

Right now I've got most of the front end torn apart minus the suspension and will start by cleaning up that area.

I'll get some more photos next time I'm out in the garage and try to keep this thread going again.
-Harrison
88GT 3800 SC1 F23 5-speed
Chilliwack
Back to Top
beken View Drop Down
Admin Group
Admin Group
Avatar

Joined: 12 February 2007
Location: Canada
Status: Offline
Points: 1462
Post Options Post Options   Quote beken Quote  Post ReplyReply Direct Link To This Post Posted: 22 February 2017 at 11:05am
Very nice, Harrison.  Does that mean we won't see you driving the Fiero much this year?  :(   

Anyways, I'm sure you will do a great restoration (and modifying?) job on her. 




Beken (aka Ken) - bekentech@westcoastfieros.com   Original and still the owner of an 85SE 2M6 4spd
Back to Top
D_sensitized View Drop Down
Admin Group
Admin Group
Avatar
Executive Member

Joined: 25 March 2008
Location: Canada
Status: Offline
Points: 601
Post Options Post Options   Quote D_sensitized Quote  Post ReplyReply Direct Link To This Post Posted: 22 February 2017 at 8:39pm
While I won't be driving it nearly as much as last year, I do still plan on getting day permits and coming out to more events and such this year in between tear downs.

I still have to take off the P/S fender, radiator and lower rad support, frank tub and windshield cowl and then I will clean up and restore everything on the front end and get it back together before moving on to other parts of the car.

I did discover that it has been in an accident before. Front right corner has some ripples in the sheet metal and split open a couple welds, and the front fascia has had some large rips repaired under its current paint. I'd never had the front hood or fascia off before and it seems to have been minor enough that it didn't take much to repair it so that it's not easily noticable. That could also be why the hood is not the original one.
-Harrison
88GT 3800 SC1 F23 5-speed
Chilliwack
Back to Top
D_sensitized View Drop Down
Admin Group
Admin Group
Avatar
Executive Member

Joined: 25 March 2008
Location: Canada
Status: Offline
Points: 601
Post Options Post Options   Quote D_sensitized Quote  Post ReplyReply Direct Link To This Post Posted: 25 February 2017 at 8:30am
Got it just about stripped down as far as I am going at this stage. I'll take out the rad hoses and P/S rocker still and then clean up and reassembly begins.

Couple "before" pics:






Next stage will be a bit slower, I'm going to build some sort of parts tumbler or borrow one and then get/make a zinc plating setup to really clean up and protect all the hardware and little brackets and bits. Then I can start putting it back together.
And I'll have to get some painting supplies before getting the body panels back on, I'd rather repair the body work before I put the panels back on, so I can get into all the tight spaces more easily.

-Harrison
88GT 3800 SC1 F23 5-speed
Chilliwack
Back to Top
D_sensitized View Drop Down
Admin Group
Admin Group
Avatar
Executive Member

Joined: 25 March 2008
Location: Canada
Status: Offline
Points: 601
Post Options Post Options   Quote D_sensitized Quote  Post ReplyReply Direct Link To This Post Posted: 01 March 2017 at 8:10pm
I dug out our tumbler from my parents' garage this weekend.
Loaded some random bolts I had just to test things with the grit I had and fired it up.




I'm not sure I trust it enough to let it go overnight yet, so I'll have it on only while I'm in the garage for now.

I also discovered one of my wiper mount things has been broken and glued up to fix.



I don't want to scrape anything away just yet in case I can't fix it back up. If it's just the linkage bits that are broken I will replace the linkage, but won't take anything apart until I have another linkage set to replace it with.

Does anyone have some wiper linkage they can sell me?
-Harrison
88GT 3800 SC1 F23 5-speed
Chilliwack
Back to Top
ARTIC-1 View Drop Down
Senior Member
Senior Member
Avatar

Joined: 14 October 2009
Location: Canada
Status: Offline
Points: 434
Post Options Post Options   Quote ARTIC-1 Quote  Post ReplyReply Direct Link To This Post Posted: 02 March 2017 at 4:43pm
Harrison
You can an have my 86 space body if you like,I'm scraping it this summer,it's a shame because there's
Only one rust spot in the whole thing,Battery area.wiper post will be included with Free Fiero.let me no.
Cheers
SNOW MAN

87-GT/AUTO-2.8_ WHITE

88-TTop/ Duke-2.5. RED
Back to Top
davidu.nif View Drop Down
Newbie
Newbie


Joined: 04 March 2017
Location: coquitlam
Status: Offline
Points: 3
Post Options Post Options   Quote davidu.nif Quote  Post ReplyReply Direct Link To This Post Posted: 04 March 2017 at 10:05am
hi do you know a good fiero mechanic? I need a steering column for an 87 gt
Back to Top
D_sensitized View Drop Down
Admin Group
Admin Group
Avatar
Executive Member

Joined: 25 March 2008
Location: Canada
Status: Offline
Points: 601
Post Options Post Options   Quote D_sensitized Quote  Post ReplyReply Direct Link To This Post Posted: 11 March 2017 at 8:52pm
Thanks for the offer Joe, I'll give you a call one of these days when I remember at a time I'm not driving or the middle of the night:P

I tried to start some zinc plating yesterday but hit a snag. Power supply was stuck at 45 volts, it's supposed to only be able to go up to 30.

Found the problem I think:



Now to just figure out what that resistor was supposed to be...
-Harrison
88GT 3800 SC1 F23 5-speed
Chilliwack
Back to Top
 Post Reply Post Reply Page  12>
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.01
Copyright ©2001-2018 Web Wiz Ltd.