Everything Else Wtd or FS - Etched Glass Fiero coffee mugs

Print Page | Close Window

Etched Glass Fiero coffee mugs

Printed From: West Coast Fieros
Category: Buy / Sell
Forum Name: Everything Else Wtd or FS
Forum Description: If it doesn't fit into the above - it goes here
URL: http://www.westcoastfieros.com/forum/forum_posts.asp?TID=2728
Printed Date: 07 June 2025 at 10:43am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: Etched Glass Fiero coffee mugs

Posted By: beken
Subject: Etched Glass Fiero coffee mugs
Date Posted: 25 October 2011 at 2:10pm

A friend of mine does glass etching to sell at Christmas craft fairs. So I commissioned a
set of glasses and had originally intended to donate them to the club door prize draws.
But since it's already close to Christmas and I won't be making the meeting this month,
and my wife really likes them too, I decided I will keep them.

However, there may be club members who might want a set and I can arrange for my
friend to do some more. They are $15 a set (2 mugs). No commission to me.

-------------

Beken (aka Ken) - bekentech@westcoastfieros.com Original and still the owner of an 85SE 2M6 4spd

Replies:

Posted By: Patrick
Date Posted: 25 October 2011 at 4:53pm

Those are pretty nice. I might get a set if your friend is willing to do more.

I don't know what's involved in regards to etching the glass, but how difficult would it be to do sets of glasses with a simplified silhouetted image of a notchie on one glass and a fast-back on the other?

Posted By: beken
Date Posted: 25 October 2011 at 9:34pm

Patrick wrote:

Those are pretty nice. I might get a set if your friend is willing to do more.

I don't know what's involved in regards to etching the glass, but how difficult would it be to do sets of glasses with�a simplified�silhouetted image of a notchie on one glass and a fast-back on the other?

I think you need to provide a very high contrast photograph to use as a template. Hence a two colour logo is pretty easy.

Check out her website....

http://dragonstreasure.ca/ - Dragon's Treasure

and click on http://dragonstreasure.ca/dt07.html - etched glass

-------------

Beken (aka Ken) - bekentech@westcoastfieros.com Original and still the owner of an 85SE 2M6 4spd

Posted By: Romeo
Date Posted: 26 October 2011 at 3:13am

I have a certain lady who might like a set of these. I'll PM you when I get back in town.

-------------
Never shift into reverse without a back-up plan.

Posted By: beken
Date Posted: 27 November 2011 at 5:48pm

I just got an email from my friend. If you are interested in getting a set of cups, you should get your order in ASAP if you want it in time for Christmas. My understanding is it takes more than a few minutes to get the etching done on each glass.

Cheers.

-------------

Beken (aka Ken) - bekentech@westcoastfieros.com Original and still the owner of an 85SE 2M6 4spd

Posted By: ARTIC-1
Date Posted: 27 November 2011 at 8:55pm

Those are some nice lookin mugs! buddy.one could put the club Logo on there all so? that would be cool.

-------------
SNOW MAN

87-GT/AUTO-2.8_ WHITE

88-TTop/ Duke-2.5. RED

Posted By: beken
Date Posted: 05 December 2011 at 1:40pm

Yes...you can put the club logo on also. But it might be too late to do for Christmas now.

-------------

Beken (aka Ken) - bekentech@westcoastfieros.com Original and still the owner of an 85SE 2M6 4spd

Posted By: beken
Date Posted: 07 December 2011 at 3:35pm

Just got this note from Kathy today...

Just checked the Fiero forum. Yes, I can do the club logo but only
with the word Fiero and the car. The other lettering would be too difficult by
hand at this point. If I get the Wishblade set up after Christmas I should
have better options once I figure out how to use it to convert photos to
vector files and upload them. If I knew of an order for mugs by Monday,
December 12 I could get it done before Christmas.

I have an order of 6 bottles to etch with seahorses. I plan to work on this
order this weekend. The woman is providing the glass so I hope it etches.
Some glass won�t etch. Too high a silica content or something. I�ve had a
couple of really nice items to etch and, after doing all the stencils and
covering, nothing. It looked as clear as when I bought it, only cleaner, as it
got dusty on the store shelves.

-------------

Beken (aka Ken) - bekentech@westcoastfieros.com Original and still the owner of an 85SE 2M6 4spd

Posted By: Capt Fiero
Date Posted: 08 December 2011 at 12:57am

Ken If she can do the 2nd designer I'll take a set of 6. The ones that have the Pegasus the word Fiero on them.

I can pay you whenever you would like, or let me know where she is located and I'll take payment directly to you her when the job is done.

-------------
Capt Fiero
88 Fiero GT 5spd V6
Eight Fifty Seven GT V8 5spd.

Posted By: beken
Date Posted: 09 December 2011 at 1:23pm

Capt Fiero wrote:

Ken If she can do the 2nd designer I'll take a set of 6.� The ones that have the Pegasus the word Fiero on them.

I can pay you whenever you would like, or let me know where she is located and I'll take payment directly to you her when the job is done.

Hi David,

I've left a message for Kathy and PM'd you contact information. I think she can get you the glasses before Christmas.

Cheers.

K

-------------

Beken (aka Ken) - bekentech@westcoastfieros.com Original and still the owner of an 85SE 2M6 4spd

Posted By: Capt Fiero
Date Posted: 19 December 2011 at 4:49pm

I just wanted to say Thank You to Ken for providing us with Kathy's information. She dropped off my Glasses on Saturday and I am really happy. She seemed to do each one of the 6 a little different so that guests can tell their cups apart. Some have frosted handles, some Fiero the Fiero logo on the left vs the right side, some of Fiero written on the base as well. Really nice. Here are the pics of the set.

-------------
Capt Fiero
88 Fiero GT 5spd V6
Eight Fifty Seven GT V8 5spd.